redis 链接超时

Blade 未结 1 2565
419443098
419443098 2019-12-07 20:24

一、该问题的重现步骤是什么?

1.  后台长时间未使用

2. 正常使用过程中也会出现 redis连接超时,

3.


二、你期待的结果是什么?实际看到的又是什么?

       


三、你正在使用的是什么产品,什么版本?在什么操作系统上?

        bladex 2.0.7, 部署在 阿里云上. 所有应用模块,包括mysql,redis都部署在同一台虚拟机上

        redis版本5.0.5,通过宝塔安装

四、请提供详细的错误堆栈信息,这很重要。


     附 异常日志, nacos配置, reidis配置


五、若有更多详细信息,请在下面提供。

//============================异常日志=============

|2019-12-06 23:10:11.553|ERROR [XNIO-1 task-49][org.springblade.core.log.error.BladeRestExceptionTranslator] - 服务器异常

org.mybatis.spring.MyBatisSystemException: nested exception is org.apache.ibatis.exceptions.PersistenceException: 

### Error querying database.  Cause: org.springframework.data.redis.RedisConnectionFailureException: Unable to connect to Redis; nested exception is io.lettuce.core.RedisConnectionException: Unable to connect to 127.0.0.1:6179

### The error may exist in com/pay/channel/mapper/OrderRequestMapper.xml

### The error may involve com.pay.channel.mapper.OrderRequestMapper.selectOrderRequestPage

### The error occurred while executing a query

### Cause: org.springframework.data.redis.RedisConnectionFailureException: Unable to connect to Redis; nested exception is io.lettuce.core.RedisConnectionException: Unable to connect to 127.0.0.1:6179

at org.mybatis.spring.MyBatisExceptionTranslator.translateExceptionIfPossible(MyBatisExceptionTranslator.java:77)

at org.mybatis.spring.SqlSessionTemplate$SqlSessionInterceptor.invoke(SqlSessionTemplate.java:446)

at com.sun.proxy.$Proxy161.selectList(Unknown Source)

at org.mybatis.spring.SqlSessionTemplate.selectList(SqlSessionTemplate.java:230)

at com.baomidou.mybatisplus.core.override.MybatisMapperMethod.executeForMany(MybatisMapperMethod.java:158)

at com.baomidou.mybatisplus.core.override.MybatisMapperMethod.execute(MybatisMapperMethod.java:76)

at com.baomidou.mybatisplus.core.override.MybatisMapperProxy.invoke(MybatisMapperProxy.java:62)

at com.sun.proxy.$Proxy170.selectOrderRequestPage(Unknown Source)

at com.pay.channel.service.impl.OrderRequestServiceImpl.selectOrderRequestPage(OrderRequestServiceImpl.java:45)

at com.pay.channel.service.impl.OrderRequestServiceImpl$$FastClassBySpringCGLIB$$a0a1f15d.invoke()

at org.springframework.cglib.proxy.MethodProxy.invoke(MethodProxy.java:218)

at org.springframework.aop.framework.CglibAopProxy$DynamicAdvisedInterceptor.intercept(CglibAopProxy.java:684)

at com.pay.channel.service.impl.OrderRequestServiceImpl$$EnhancerBySpringCGLIB$$b65c8758.selectOrderRequestPage()

at com.pay.channel.controller.OrderRequestController.page(OrderRequestController.java:96)

at com.pay.channel.controller.OrderRequestController$$FastClassBySpringCGLIB$$fb06aaf1.invoke()

at org.springframework.cglib.proxy.MethodProxy.invoke(MethodProxy.java:218)

at org.springframework.aop.framework.CglibAopProxy$CglibMethodInvocation.invokeJoinpoint(CglibAopProxy.java:749)

at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:163)

at org.springframework.aop.aspectj.MethodInvocationProceedingJoinPoint.proceed(MethodInvocationProceedingJoinPoint.java:88)

at org.springblade.core.log.aspect.RequestLogAspect.aroundApi(RequestLogAspect.java:181)

at sun.reflect.GeneratedMethodAccessor195.invoke(Unknown Source)

at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

at java.lang.reflect.Method.invoke(Method.java:498)

at org.springframework.aop.aspectj.AbstractAspectJAdvice.invokeAdviceMethodWithGivenArgs(AbstractAspectJAdvice.java:644)

at org.springframework.aop.aspectj.AbstractAspectJAdvice.invokeAdviceMethod(AbstractAspectJAdvice.java:633)

at org.springframework.aop.aspectj.AspectJAroundAdvice.invoke(AspectJAroundAdvice.java:70)

at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:175)

at org.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:93)

at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:186)

at org.springframework.aop.framework.CglibAopProxy$DynamicAdvisedInterceptor.intercept(CglibAopProxy.java:688)

at com.pay.channel.controller.OrderRequestController$$EnhancerBySpringCGLIB$$fe9c44ac.page()

at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)

at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

at java.lang.reflect.Method.invoke(Method.java:498)

at org.springframework.web.method.support.InvocableHandlerMethod.doInvoke(InvocableHandlerMethod.java:190)

at org.springframework.web.method.support.InvocableHandlerMethod.invokeForRequest(InvocableHandlerMethod.java:138)

at org.springframework.web.servlet.mvc.method.annotation.ServletInvocableHandlerMethod.invokeAndHandle(ServletInvocableHandlerMethod.java:104)

at org.springframework.web.servlet.mvc.method.annotation.RequestMappingHandlerAdapter.invokeHandlerMethod(RequestMappingHandlerAdapter.java:892)

at org.springframework.web.servlet.mvc.method.annotation.RequestMappingHandlerAdapter.handleInternal(RequestMappingHandlerAdapter.java:797)

at org.springframework.web.servlet.mvc.method.AbstractHandlerMethodAdapter.handle(AbstractHandlerMethodAdapter.java:87)

at org.springframework.web.servlet.DispatcherServlet.doDispatch(DispatcherServlet.java:1039)

at org.springframework.web.servlet.DispatcherServlet.doService(DispatcherServlet.java:942)

at org.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:1005)

at org.springframework.web.servlet.FrameworkServlet.doGet(FrameworkServlet.java:897)

at javax.servlet.http.HttpServlet.service(HttpServlet.java:645)

at org.springframework.web.servlet.FrameworkServlet.service(FrameworkServlet.java:882)

at javax.servlet.http.HttpServlet.service(HttpServlet.java:750)

at io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.java:74)

at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:129)

at com.github.xiaoymin.swaggerbootstrapui.filter.SecurityBasicAuthFilter.doFilter(SecurityBasicAuthFilter.java:84)

at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61)

at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)

at com.github.xiaoymin.swaggerbootstrapui.filter.ProductionSecurityFilter.doFilter(ProductionSecurityFilter.java:53)

at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61)

at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)

at org.springblade.core.tool.support.xss.XssFilter.doFilter(XssFilter.java:49)

at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61)

at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)

at com.alibaba.druid.support.http.WebStatFilter.doFilter(WebStatFilter.java:124)

at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61)

at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)

at org.springframework.boot.actuate.web.trace.servlet.HttpTraceFilter.doFilterInternal(HttpTraceFilter.java:88)

at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:118)

at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61)

at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)

at org.springframework.web.filter.RequestContextFilter.doFilterInternal(RequestContextFilter.java:99)

at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:118)

at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61)

at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)

at org.springframework.web.filter.FormContentFilter.doFilterInternal(FormContentFilter.java:92)

at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:118)

at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61)

at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)

at org.springframework.web.filter.HiddenHttpMethodFilter.doFilterInternal(HiddenHttpMethodFilter.java:93)

at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:118)

at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61)

at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)

at org.springframework.boot.actuate.metrics.web.servlet.WebMvcMetricsFilter.filterAndRecordMetrics(WebMvcMetricsFilter.java:114)

at org.springframework.boot.actuate.metrics.web.servlet.WebMvcMetricsFilter.doFilterInternal(WebMvcMetricsFilter.java:104)

at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:118)

at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61)

at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)

at org.springframework.web.filter.CharacterEncodingFilter.doFilterInternal(CharacterEncodingFilter.java:200)

at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:118)

at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61)

at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)

at com.alibaba.csp.sentinel.adapter.servlet.CommonFilter.doFilter(CommonFilter.java:91)

at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:61)

at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)

at io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.java:84)

at io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleRequest(ServletSecurityRoleHandler.java:62)

at io.undertow.servlet.handlers.ServletChain$1.handleRequest(ServletChain.java:68)

at io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(ServletDispatchingHandler.java:36)

at io.undertow.servlet.handlers.RedirectDirHandler.handleRequest(RedirectDirHandler.java:68)

at io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.handleRequest(SSLInformationAssociationHandler.java:132)

at io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.handleRequest(ServletAuthenticationCallHandler.java:57)

at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)

at io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest(AbstractConfidentialityHandler.java:46)

at io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHandler.handleRequest(ServletConfidentialityConstraintHandler.java:64)

at io.undertow.security.handlers.AuthenticationMechanismsHandler.handleRequest(AuthenticationMechanismsHandler.java:60)

at io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.handleRequest(CachedAuthenticatedSessionHandler.java:77)

at io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.handleRequest(AbstractSecurityContextAssociationHandler.java:43)

at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)

at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)

at io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(ServletInitialHandler.java:269)

at io.undertow.servlet.handlers.ServletInitialHandler.access$100(ServletInitialHandler.java:78)

at io.undertow.servlet.handlers.ServletInitialHandler$2.call(ServletInitialHandler.java:133)

at io.undertow.servlet.handlers.ServletInitialHandler$2.call(ServletInitialHandler.java:130)

at io.undertow.servlet.core.ServletRequestContextThreadSetupAction$1.call(ServletRequestContextThreadSetupAction.java:48)

at io.undertow.servlet.core.ContextClassLoaderSetupAction$1.call(ContextClassLoaderSetupAction.java:43)

at io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(ServletInitialHandler.java:249)

at io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletInitialHandler.java:78)

at io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(ServletInitialHandler.java:99)

at io.undertow.server.Connectors.executeRootHandler(Connectors.java:376)

at io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:830)

at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149)

at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624)

at java.lang.Thread.run(Thread.java:748)

Caused by: org.apache.ibatis.exceptions.PersistenceException: 

### Error querying database.  Cause: org.springframework.data.redis.RedisConnectionFailureException: Unable to connect to Redis; nested exception is io.lettuce.core.RedisConnectionException: Unable to connect to 127.0.0.1:6179

### The error may exist in com/pay/channel/mapper/OrderRequestMapper.xml

### The error may involve com.pay.channel.mapper.OrderRequestMapper.selectOrderRequestPage

### The error occurred while executing a query

### Cause: org.springframework.data.redis.RedisConnectionFailureException: Unable to connect to Redis; nested exception is io.lettuce.core.RedisConnectionException: Unable to connect to 127.0.0.1:6179

at org.apache.ibatis.exceptions.ExceptionFactory.wrapException(ExceptionFactory.java:30)

at org.apache.ibatis.session.defaults.DefaultSqlSession.selectList(DefaultSqlSession.java:149)

at org.apache.ibatis.session.defaults.DefaultSqlSession.selectList(DefaultSqlSession.java:140)

at sun.reflect.GeneratedMethodAccessor189.invoke(Unknown Source)

at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

at java.lang.reflect.Method.invoke(Method.java:498)

at org.mybatis.spring.SqlSessionTemplate$SqlSessionInterceptor.invoke(SqlSessionTemplate.java:433)

... 117 common frames omitted

Caused by: org.springframework.data.redis.RedisConnectionFailureException: Unable to connect to Redis; nested exception is io.lettuce.core.RedisConnectionException: Unable to connect to 127.0.0.1:6179

at org.springframework.data.redis.connection.lettuce.LettuceConnectionFactory$SharedConnection.getNativeConnection(LettuceConnectionFactory.java:1106)

at org.springframework.data.redis.connection.lettuce.LettuceConnectionFactory$SharedConnection.getConnection(LettuceConnectionFactory.java:1085)

at org.springframework.data.redis.connection.lettuce.LettuceConnectionFactory.getSharedConnection(LettuceConnectionFactory.java:866)

at org.springframework.data.redis.connection.lettuce.LettuceConnectionFactory.getConnection(LettuceConnectionFactory.java:341)

at org.springblade.core.redis.DefaultRedisCacheWriter.execute(DefaultRedisCacheWriter.java:207)

at org.springblade.core.redis.DefaultRedisCacheWriter.get(DefaultRedisCacheWriter.java:87)

at org.springframework.data.redis.cache.RedisCache.lookup(RedisCache.java:82)

at org.springframework.cache.support.AbstractValueAdaptingCache.get(AbstractValueAdaptingCache.java:66)

at org.springblade.core.cache.utils.CacheUtil.get(CacheUtil.java:77)

at org.springblade.system.cache.DataScopeCache.getDataScopeByMapper(DataScopeCache.java:55)

at org.springblade.system.handler.DataScopeModelHandler.getDataScopeByMapper(DataScopeModelHandler.java:41)

at org.springblade.core.datascope.handler.BladeDataScopeHandler.sqlCondition(BladeDataScopeHandler.java:50)

at org.springblade.core.datascope.interceptor.DataScopeInterceptor.intercept(DataScopeInterceptor.java:113)

at org.apache.ibatis.plugin.Plugin.invoke(Plugin.java:61)

at com.sun.proxy.$Proxy247.prepare(Unknown Source)

at com.baomidou.mybatisplus.core.executor.MybatisSimpleExecutor.prepareStatement(MybatisSimpleExecutor.java:94)

at com.baomidou.mybatisplus.core.executor.MybatisSimpleExecutor.doQuery(MybatisSimpleExecutor.java:66)

at org.apache.ibatis.executor.BaseExecutor.queryFromDatabase(BaseExecutor.java:324)

at org.apache.ibatis.executor.BaseExecutor.query(BaseExecutor.java:156)

at org.apache.ibatis.executor.BaseExecutor.query(BaseExecutor.java:136)

at org.apache.ibatis.session.defaults.DefaultSqlSession.selectList(DefaultSqlSession.java:147)

... 122 common frames omitted

Caused by: io.lettuce.core.RedisConnectionException: Unable to connect to 127.0.0.1:6179

at io.lettuce.core.RedisConnectionException.create(RedisConnectionException.java:78)

at io.lettuce.core.RedisConnectionException.create(RedisConnectionException.java:56)

at io.lettuce.core.AbstractRedisClient.getConnection(AbstractRedisClient.java:235)

at io.lettuce.core.RedisClient.connect(RedisClient.java:204)

at org.springframework.data.redis.connection.lettuce.StandaloneConnectionProvider.lambda$getConnection$1(StandaloneConnectionProvider.java:113)

at java.util.Optional.orElseGet(Optional.java:267)

at org.springframework.data.redis.connection.lettuce.StandaloneConnectionProvider.getConnection(StandaloneConnectionProvider.java:113)

at org.springframework.data.redis.connection.lettuce.LettuceConnectionFactory$SharedConnection.getNativeConnection(LettuceConnectionFactory.java:1104)

... 142 common frames omitted

Caused by: io.lettuce.core.RedisCommandTimeoutException: Command timed out after 1 minute(s)

at io.lettuce.core.ExceptionFactory.createTimeoutException(ExceptionFactory.java:51)

at io.lettuce.core.protocol.CommandExpiryWriter.lambda$potentiallyExpire$0(CommandExpiryWriter.java:167)

at io.netty.util.concurrent.PromiseTask$RunnableAdapter.call(PromiseTask.java:38)

at io.netty.util.concurrent.ScheduledFutureTask.run(ScheduledFutureTask.java:127)

at io.netty.util.concurrent.DefaultEventExecutor.run(DefaultEventExecutor.java:66)

at io.netty.util.concurrent.SingleThreadEventExecutor$5.run(SingleThreadEventExecutor.java:918)

at io.netty.util.internal.ThreadExecutorMap$2.run(ThreadExecutorMap.java:74)

at io.netty.util.concurrent.FastThreadLocalRunnable.run(FastThreadLocalRunnable.java:30)

... 1 common frames omitted





//==========================nacos redis 配置===================================



spring:

  redis:

    host: 127.0.0.1

    port: 6179

    password: xxxxxx

    database: 0

    ssl: false

//==========================redis.config 配置==================================




# Redis configuration file example.

requirepass xxxxxx

maxclients 10000

#

# Note that in order to read the configuration file, Redis must be

# started with the file path as first argument:

#

# ./redis-server /path/to/redis.conf


# Note on units: when memory size is needed, it is possible to specify

# it in the usual form of 1k 5GB 4M and so forth:

#

# 1k => 1000 bytes

# 1kb => 1024 bytes

# 1m => 1000000 bytes

# 1mb => 1024*1024 bytes

# 1g => 1000000000 bytes

# 1gb => 1024*1024*1024 bytes

#

# units are case insensitive so 1GB 1Gb 1gB are all the same.


################################## INCLUDES ###################################


# Include one or more other config files here.  This is useful if you

# have a standard template that goes to all Redis servers but also need

# to customize a few per-server settings.  Include files can include

# other files, so use this wisely.

#

# Notice option "include" won't be rewritten by command "CONFIG REWRITE"

# from admin or Redis Sentinel. Since Redis always uses the last processed

# line as value of a configuration directive, you'd better put includes

# at the beginning of this file to avoid overwriting config change at runtime.

#

# If instead you are interested in using includes to override configuration

# options, it is better to use include as the last line.

#

# include /path/to/local.conf

# include /path/to/other.conf


################################## MODULES #####################################


# Load modules at startup. If the server is not able to load modules

# it will abort. It is possible to use multiple loadmodule directives.

#

# loadmodule /path/to/my_module.so

# loadmodule /path/to/other_module.so


################################## NETWORK #####################################


# By default, if no "bind" configuration directive is specified, Redis listens

# for connections from all the network interfaces available on the server.

# It is possible to listen to just one or multiple selected interfaces using

# the "bind" configuration directive, followed by one or more IP addresses.

#

# Examples:

#

# bind 192.168.1.100 10.0.0.1

# bind 127.0.0.1 ::1

#

# ~~~ WARNING ~~~ If the computer running Redis is directly exposed to the

# internet, binding to all the interfaces is dangerous and will expose the

# instance to everybody on the internet. So by default we uncomment the

# following bind directive, that will force Redis to listen only into

# the IPv4 loopback interface address (this means Redis will be able to

# accept connections only from clients running into the same computer it

# is running).

#

# IF YOU ARE SURE YOU WANT YOUR INSTANCE TO LISTEN TO ALL THE INTERFACES

# JUST COMMENT THE FOLLOWING LINE.

# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

bind 127.0.0.1


# Protected mode is a layer of security protection, in order to avoid that

# Redis instances left open on the internet are accessed and exploited.

#

# When protected mode is on and if:

#

# 1) The server is not binding explicitly to a set of addresses using the

#    "bind" directive.

# 2) No password is configured.

#

# The server only accepts connections from clients connecting from the

# IPv4 and IPv6 loopback addresses 127.0.0.1 and ::1, and from Unix domain

# sockets.

#

# By default protected mode is enabled. You should disable it only if

# you are sure you want clients from other hosts to connect to Redis

# even if no authentication is configured, nor a specific set of interfaces

# are explicitly listed using the "bind" directive.

protected-mode no


# Accept connections on the specified port, default is 6379 (IANA #815344).

# If port 0 is specified Redis will not listen on a TCP socket.

port 6179


# TCP listen() backlog.

#

# In high requests-per-second environments you need an high backlog in order

# to avoid slow clients connections issues. Note that the Linux kernel

# will silently truncate it to the value of /proc/sys/net/core/somaxconn so

# make sure to raise both the value of somaxconn and tcp_max_syn_backlog

# in order to get the desired effect.

tcp-backlog 511


# Unix socket.

#

# Specify the path for the Unix socket that will be used to listen for

# incoming connections. There is no default, so Redis will not listen

# on a unix socket when not specified.

#

# unixsocket /tmp/redis.sock

# unixsocketperm 700


# Close the connection after a client is idle for N seconds (0 to disable)

timeout 0


# TCP keepalive.

#

# If non-zero, use SO_KEEPALIVE to send TCP ACKs to clients in absence

# of communication. This is useful for two reasons:

#

# 1) Detect dead peers.

# 2) Take the connection alive from the point of view of network

#    equipment in the middle.

#

# On Linux, the specified value (in seconds) is the period used to send ACKs.

# Note that to close the connection the double of the time is needed.

# On other kernels the period depends on the kernel configuration.

#

# A reasonable value for this option is 300 seconds, which is the new

# Redis default starting with Redis 3.2.1.

tcp-keepalive 300


################################# GENERAL #####################################


# By default Redis does not run as a daemon. Use 'yes' if you need it.

# Note that Redis will write a pid file in /var/run/redis.pid when daemonized.

daemonize no 


# If you run Redis from upstart or systemd, Redis can interact with your

# supervision tree. Options:

#   supervised no      - no supervision interaction

#   supervised upstart - signal upstart by putting Redis into SIGSTOP mode

#   supervised systemd - signal systemd by writing READY=1 to $NOTIFY_SOCKET

#   supervised auto    - detect upstart or systemd method based on

#                        UPSTART_JOB or NOTIFY_SOCKET environment variables

# Note: these supervision methods only signal "process is ready."

#       They do not enable continuous liveness pings back to your supervisor.

supervised no


# If a pid file is specified, Redis writes it where specified at startup

# and removes it at exit.

#

# When the server runs non daemonized, no pid file is created if none is

# specified in the configuration. When the server is daemonized, the pid file

# is used even if not specified, defaulting to "/var/run/redis.pid".

#

# Creating a pid file is best effort: if Redis is not able to create it

# nothing bad happens, the server will start and run normally.

pidfile /www/server/redis/redis.pid 


# Specify the server verbosity level.

# This can be one of:

# debug (a lot of information, useful for development/testing)

# verbose (many rarely useful info, but not a mess like the debug level)

# notice (moderately verbose, what you want in production probably)

# warning (only very important / critical messages are logged)

loglevel notice


# Specify the log file name. Also the empty string can be used to force

# Redis to log on the standard output. Note that if you use standard

# output for logging but daemonize, logs will be sent to /dev/null

logfile ""


# To enable logging to the system logger, just set 'syslog-enabled' to yes,

# and optionally update the other syslog parameters to suit your needs.

# syslog-enabled no


# Specify the syslog identity.

# syslog-ident redis


# Specify the syslog facility. Must be USER or between LOCAL0-LOCAL7.

# syslog-facility local0


# Set the number of databases. The default database is DB 0, you can select

# a different one on a per-connection basis using SELECT where

# dbid is a number between 0 and 'databases'-1

databases 16


# By default Redis shows an ASCII art logo only when started to log to the

# standard output and if the standard output is a TTY. Basically this means

# that normally a logo is displayed only in interactive sessions.

#

# However it is possible to force the pre-4.0 behavior and always show a

# ASCII art logo in startup logs by setting the following option to yes.

always-show-logo yes


################################ SNAPSHOTTING  ################################

#

# Save the DB on disk:

#

#   save

#

#   Will save the DB if both the given number of seconds and the given

#   number of write operations against the DB occurred.

#

#   In the example below the behaviour will be to save:

#   after 900 sec (15 min) if at least 1 key changed

#   after 300 sec (5 min) if at least 10 keys changed

#   after 60 sec if at least 10000 keys changed

#

#   Note: you can disable saving completely by commenting out all "save" lines.

#

#   It is also possible to remove all the previously configured save

#   points by adding a save directive with a single empty string argument

#   like in the following example:

#

#   save ""


save 900 1

save 300 10

save 60 10000


# By default Redis will stop accepting writes if RDB snapshots are enabled

# (at least one save point) and the latest background save failed.

# This will make the user aware (in a hard way) that data is not persisting

# on disk properly, otherwise chances are that no one will notice and some

# disaster will happen.

#

# If the background saving process will start working again Redis will

# automatically allow writes again.

#

# However if you have setup your proper monitoring of the Redis server

# and persistence, you may want to disable this feature so that Redis will

# continue to work as usual even if there are problems with disk,

# permissions, and so forth.

stop-writes-on-bgsave-error yes


# Compress string objects using LZF when dump .rdb databases?

# For default that's set to 'yes' as it's almost always a win.

# If you want to save some CPU in the saving child set it to 'no' but

# the dataset will likely be bigger if you have compressible values or keys.

rdbcompression yes


# Since version 5 of RDB a CRC64 checksum is placed at the end of the file.

# This makes the format more resistant to corruption but there is a performance

# hit to pay (around 10%) when saving and loading RDB files, so you can disable it

# for maximum performances.

#

# RDB files created with checksum disabled have a checksum of zero that will

# tell the loading code to skip the check.

rdbchecksum yes


# The filename where to dump the DB

dbfilename dump.rdb


# The working directory.

#

# The DB will be written inside this directory, with the filename specified

# above using the 'dbfilename' configuration directive.

#

# The Append Only File will also be created inside this directory.

#

# Note that you must specify a directory here, not a file name.

dir /www/server/redis/


################################# REPLICATION #################################


# Master-Replica replication. Use replicaof to make a Redis instance a copy of

# another Redis server. A few things to understand ASAP about Redis replication.

#

#   +------------------+      +---------------+

#   |      Master      | ---> |    Replica    |

#   | (receive writes) |      |  (exact copy) |

#   +------------------+      +---------------+

#

# 1) Redis replication is asynchronous, but you can configure a master to

#    stop accepting writes if it appears to be not connected with at least

#    a given number of replicas.

# 2) Redis replicas are able to perform a partial resynchronization with the

#    master if the replication link is lost for a relatively small amount of

#    time. You may want to configure the replication backlog size (see the next

#    sections of this file) with a sensible value depending on your needs.

# 3) Replication is automatic and does not need user intervention. After a

#    network partition replicas automatically try to reconnect to masters

#    and resynchronize with them.

#

# replicaof


# If the master is password protected (using the "requirepass" configuration

# directive below) it is possible to tell the replica to authenticate before

# starting the replication synchronization process, otherwise the master will

# refuse the replica request.

#

# masterauth


# When a replica loses its connection with the master, or when the replication

# is still in progress, the replica can act in two different ways:

#

# 1) if replica-serve-stale-data is set to 'yes' (the default) the replica will

#    still reply to client requests, possibly with out of date data, or the

#    data set may just be empty if this is the first synchronization.

#

# 2) if replica-serve-stale-data is set to 'no' the replica will reply with

#    an error "SYNC with master in progress" to all the kind of commands

#    but to INFO, replicaOF, AUTH, PING, SHUTDOWN, REPLCONF, ROLE, CONFIG,

#    SUBSCRIBE, UNSUBSCRIBE, PSUBSCRIBE, PUNSUBSCRIBE, PUBLISH, PUBSUB,

#    COMMAND, POST, HOST: and LATENCY.

#

replica-serve-stale-data yes


# You can configure a replica instance to accept writes or not. Writing against

# a replica instance may be useful to store some ephemeral data (because data

# written on a replica will be easily deleted after resync with the master) but

# may also cause problems if clients are writing to it because of a

# misconfiguration.

#

# Since Redis 2.6 by default replicas are read-only.

#

# Note: read only replicas are not designed to be exposed to untrusted clients

# on the internet. It's just a protection layer against misuse of the instance.

# Still a read only replica exports by default all the administrative commands

# such as CONFIG, DEBUG, and so forth. To a limited extent you can improve

# security of read only replicas using 'rename-command' to shadow all the

# administrative / dangerous commands.

replica-read-only yes


# Replication SYNC strategy: disk or socket.

#

# -------------------------------------------------------

# WARNING: DISKLESS REPLICATION IS EXPERIMENTAL CURRENTLY

# -------------------------------------------------------

#

# New replicas and reconnecting replicas that are not able to continue the replication

# process just receiving differences, need to do what is called a "full

# synchronization". An RDB file is transmitted from the master to the replicas.

# The transmission can happen in two different ways:

#

# 1) Disk-backed: The Redis master creates a new process that writes the RDB

#                 file on disk. Later the file is transferred by the parent

#                 process to the replicas incrementally.

# 2) Diskless: The Redis master creates a new process that directly writes the

#              RDB file to replica sockets, without touching the disk at all.

#

# With disk-backed replication, while the RDB file is generated, more replicas

# can be queued and served with the RDB file as soon as the current child producing

# the RDB file finishes its work. With diskless replication instead once

# the transfer starts, new replicas arriving will be queued and a new transfer

# will start when the current one terminates.

#

# When diskless replication is used, the master waits a configurable amount of

# time (in seconds) before starting the transfer in the hope that multiple replicas

# will arrive and the transfer can be parallelized.

#

# With slow disks and fast (large bandwidth) networks, diskless replication

# works better.

repl-diskless-sync no


# When diskless replication is enabled, it is possible to configure the delay

# the server waits in order to spawn the child that transfers the RDB via socket

# to the replicas.

#

# This is important since once the transfer starts, it is not possible to serve

# new replicas arriving, that will be queued for the next RDB transfer, so the server

# waits a delay in order to let more replicas arrive.

#

# The delay is specified in seconds, and by default is 5 seconds. To disable

# it entirely just set it to 0 seconds and the transfer will start ASAP.

repl-diskless-sync-delay 5


# Replicas send PINGs to server in a predefined interval. It's possible to change

# this interval with the repl_ping_replica_period option. The default value is 10

# seconds.

#

# repl-ping-replica-period 10


# The following option sets the replication timeout for:

#

# 1) Bulk transfer I/O during SYNC, from the point of view of replica.

# 2) Master timeout from the point of view of replicas (data, pings).

# 3) Replica timeout from the point of view of masters (REPLCONF ACK pings).

#

# It is important to make sure that this value is greater than the value

# specified for repl-ping-replica-period otherwise a timeout will be detected

# every time there is low traffic between the master and the replica.

#

# repl-timeout 60


# Disable TCP_NODELAY on the replica socket after SYNC?

#

# If you select "yes" Redis will use a smaller number of TCP packets and

# less bandwidth to send data to replicas. But this can add a delay for

# the data to appear on the replica side, up to 40 milliseconds with

# Linux kernels using a default configuration.

#

# If you select "no" the delay for data to appear on the replica side will

# be reduced but more bandwidth will be used for replication.

#

# By default we optimize for low latency, but in very high traffic conditions

# or when the master and replicas are many hops away, turning this to "yes" may

# be a good idea.

repl-disable-tcp-nodelay no


# Set the replication backlog size. The backlog is a buffer that accumulates

# replica data when replicas are disconnected for some time, so that when a replica

# wants to reconnect again, often a full resync is not needed, but a partial

# resync is enough, just passing the portion of data the replica missed while

# disconnected.

#

# The bigger the replication backlog, the longer the time the replica can be

# disconnected and later be able to perform a partial resynchronization.

#

# The backlog is only allocated once there is at least a replica connected.

#

# repl-backlog-size 1mb


# After a master has no longer connected replicas for some time, the backlog

# will be freed. The following option configures the amount of seconds that

# need to elapse, starting from the time the last replica disconnected, for

# the backlog buffer to be freed.

#

# Note that replicas never free the backlog for timeout, since they may be

# promoted to masters later, and should be able to correctly "partially

# resynchronize" with the replicas: hence they should always accumulate backlog.

#

# A value of 0 means to never release the backlog.

#

# repl-backlog-ttl 3600


# The replica priority is an integer number published by Redis in the INFO output.

# It is used by Redis Sentinel in order to select a replica to promote into a

# master if the master is no longer working correctly.

#

# A replica with a low priority number is considered better for promotion, so

# for instance if there are three replicas with priority 10, 100, 25 Sentinel will

# pick the one with priority 10, that is the lowest.

#

# However a special priority of 0 marks the replica as not able to perform the

# role of master, so a replica with priority of 0 will never be selected by

# Redis Sentinel for promotion.

#

# By default the priority is 100.

replica-priority 100


# It is possible for a master to stop accepting writes if there are less than

# N replicas connected, having a lag less or equal than M seconds.

#

# The N replicas need to be in "online" state.

#

# The lag in seconds, that must be <= the specified value, is calculated from

# the last ping received from the replica, that is usually sent every second.

#

# This option does not GUARANTEE that N replicas will accept the write, but

# will limit the window of exposure for lost writes in case not enough replicas

# are available, to the specified number of seconds.

#

# For example to require at least 3 replicas with a lag <= 10 seconds use:

#

# min-replicas-to-write 3

# min-replicas-max-lag 10

#

# Setting one or the other to 0 disables the feature.

#

# By default min-replicas-to-write is set to 0 (feature disabled) and

# min-replicas-max-lag is set to 10.


# A Redis master is able to list the address and port of the attached

# replicas in different ways. For example the "INFO replication" section

# offers this information, which is used, among other tools, by

# Redis Sentinel in order to discover replica instances.

# Another place where this info is available is in the output of the

# "ROLE" command of a master.

#

# The listed IP and address normally reported by a replica is obtained

# in the following way:

#

#   IP: The address is auto detected by checking the peer address

#   of the socket used by the replica to connect with the master.

#

#   Port: The port is communicated by the replica during the replication

#   handshake, and is normally the port that the replica is using to

#   listen for connections.

#

# However when port forwarding or Network Address Translation (NAT) is

# used, the replica may be actually reachable via different IP and port

# pairs. The following two options can be used by a replica in order to

# report to its master a specific set of IP and port, so that both INFO

# and ROLE will report those values.

#

# There is no need to use both the options if you need to override just

# the port or the IP address.

#

# replica-announce-ip 5.5.5.5

# replica-announce-port 1234


################################## SECURITY ###################################


# Require clients to issue AUTH before processing any other

# commands.  This might be useful in environments in which you do not trust

# others with access to the host running redis-server.

#

# This should stay commented out for backward compatibility and because most

# people do not need auth (e.g. they run their own servers).

#

# Warning: since Redis is pretty fast an outside user can try up to

# 150k passwords per second against a good box. This means that you should

# use a very strong password otherwise it will be very easy to break.

#

# requirepass foobared


# Command renaming.

#

# It is possible to change the name of dangerous commands in a shared

# environment. For instance the CONFIG command may be renamed into something

# hard to guess so that it will still be available for internal-use tools

# but not available for general clients.

#

# Example:

#

# rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52

#

# It is also possible to completely kill a command by renaming it into

# an empty string:

#

# rename-command CONFIG ""

#

# Please note that changing the name of commands that are logged into the

# AOF file or transmitted to replicas may cause problems.


################################### CLIENTS ####################################


# Set the max number of connected clients at the same time. By default

# this limit is set to 10000 clients, however if the Redis server is not

# able to configure the process file limit to allow for the specified limit

# the max number of allowed clients is set to the current file limit

# minus 32 (as Redis reserves a few file descriptors for internal uses).

#

# Once the limit is reached Redis will close all the new connections sending

# an error 'max number of clients reached'.

#

# maxclients 10000


############################## MEMORY MANAGEMENT ################################


# Set a memory usage limit to the specified amount of bytes.

# When the memory limit is reached Redis will try to remove keys

# according to the eviction policy selected (see maxmemory-policy).

#

# If Redis can't remove keys according to the policy, or if the policy is

# set to 'noeviction', Redis will start to reply with errors to commands

# that would use more memory, like SET, LPUSH, and so on, and will continue

# to reply to read-only commands like GET.

#

# This option is usually useful when using Redis as an LRU or LFU cache, or to

# set a hard memory limit for an instance (using the 'noeviction' policy).

#

# WARNING: If you have replicas attached to an instance with maxmemory on,

# the size of the output buffers needed to feed the replicas are subtracted

# from the used memory count, so that network problems / resyncs will

# not trigger a loop where keys are evicted, and in turn the output

# buffer of replicas is full with DELs of keys evicted triggering the deletion

# of more keys, and so forth until the database is completely emptied.

#

# In short... if you have replicas attached it is suggested that you set a lower

# limit for maxmemory so that there is some free RAM on the system for replica

# output buffers (but this is not needed if the policy is 'noeviction').

#

# maxmemory


# MAXMEMORY POLICY: how Redis will select what to remove when maxmemory

# is reached. You can select among five behaviors:

#

# volatile-lru -> Evict using approximated LRU among the keys with an expire set.

# allkeys-lru -> Evict any key using approximated LRU.

# volatile-lfu -> Evict using approximated LFU among the keys with an expire set.

# allkeys-lfu -> Evict any key using approximated LFU.

# volatile-random -> Remove a random key among the ones with an expire set.

# allkeys-random -> Remove a random key, any key.

# volatile-ttl -> Remove the key with the nearest expire time (minor TTL)

# noeviction -> Don't evict anything, just return an error on write operations.

#

# LRU means Least Recently Used

# LFU means Least Frequently Used

#

# Both LRU, LFU and volatile-ttl are implemented using approximated

# randomized algorithms.

#

# Note: with any of the above policies, Redis will return an error on write

#       operations, when there are no suitable keys for eviction.

#

#       At the date of writing these commands are: set setnx setex append

#       incr decr rpush lpush rpushx lpushx linsert lset rpoplpush sadd

#       sinter sinterstore sunion sunionstore sdiff sdiffstore zadd zincrby

#       zunionstore zinterstore hset hsetnx hmset hincrby incrby decrby

#       getset mset msetnx exec sort

#

# The default is:

#

# maxmemory-policy noeviction


# LRU, LFU and minimal TTL algorithms are not precise algorithms but approximated

# algorithms (in order to save memory), so you can tune it for speed or

# accuracy. For default Redis will check five keys and pick the one that was

# used less recently, you can change the sample size using the following

# configuration directive.

#

# The default of 5 produces good enough results. 10 Approximates very closely

# true LRU but costs more CPU. 3 is faster but not very accurate.

#

# maxmemory-samples 5


# Starting from Redis 5, by default a replica will ignore its maxmemory setting

# (unless it is promoted to master after a failover or manually). It means

# that the eviction of keys will be just handled by the master, sending the

# DEL commands to the replica as keys evict in the master side.

#

# This behavior ensures that masters and replicas stay consistent, and is usually

# what you want, however if your replica is writable, or you want the replica to have

# a different memory setting, and you are sure all the writes performed to the

# replica are idempotent, then you may change this default (but be sure to understand

# what you are doing).

#

# Note that since the replica by default does not evict, it may end using more

# memory than the one set via maxmemory (there are certain buffers that may

# be larger on the replica, or data structures may sometimes take more memory and so

# forth). So make sure you monitor your replicas and make sure they have enough

# memory to never hit a real out-of-memory condition before the master hits

# the configured maxmemory setting.

#

# replica-ignore-maxmemory yes


############################# LAZY FREEING ####################################


# Redis has two primitives to delete keys. One is called DEL and is a blocking

# deletion of the object. It means that the server stops processing new commands

# in order to reclaim all the memory associated with an object in a synchronous

# way. If the key deleted is associated with a small object, the time needed

# in order to execute the DEL command is very small and comparable to most other

# O(1) or O(log_N) commands in Redis. However if the key is associated with an

# aggregated value containing millions of elements, the server can block for

# a long time (even seconds) in order to complete the operation.

#

# For the above reasons Redis also offers non blocking deletion primitives

# such as UNLINK (non blocking DEL) and the ASYNC option of FLUSHALL and

# FLUSHDB commands, in order to reclaim memory in background. Those commands

# are executed in constant time. Another thread will incrementally free the

# object in the background as fast as possible.

#

# DEL, UNLINK and ASYNC option of FLUSHALL and FLUSHDB are user-controlled.

# It's up to the design of the application to understand when it is a good

# idea to use one or the other. However the Redis server sometimes has to

# delete keys or flush the whole database as a side effect of other operations.

# Specifically Redis deletes objects independently of a user call in the

# following scenarios:

#

# 1) On eviction, because of the maxmemory and maxmemory policy configurations,

#    in order to make room for new data, without going over the specified

#    memory limit.

# 2) Because of expire: when a key with an associated time to live (see the

#    EXPIRE command) must be deleted from memory.

# 3) Because of a side effect of a command that stores data on a key that may

#    already exist. For example the RENAME command may delete the old key

#    content when it is replaced with another one. Similarly SUNIONSTORE

#    or SORT with STORE option may delete existing keys. The SET command

#    itself removes any old content of the specified key in order to replace

#    it with the specified string.

# 4) During replication, when a replica performs a full resynchronization with

#    its master, the content of the whole database is removed in order to

#    load the RDB file just transferred.

#

# In all the above cases the default is to delete objects in a blocking way,

# like if DEL was called. However you can configure each case specifically

# in order to instead release memory in a non-blocking way like if UNLINK

# was called, using the following configuration directives:


lazyfree-lazy-eviction no

lazyfree-lazy-expire no

lazyfree-lazy-server-del no

replica-lazy-flush no


############################## APPEND ONLY MODE ###############################


# By default Redis asynchronously dumps the dataset on disk. This mode is

# good enough in many applications, but an issue with the Redis process or

# a power outage may result into a few minutes of writes lost (depending on

# the configured save points).

#

# The Append Only File is an alternative persistence mode that provides

# much better durability. For instance using the default data fsync policy

# (see later in the config file) Redis can lose just one second of writes in a

# dramatic event like a server power outage, or a single write if something

# wrong with the Redis process itself happens, but the operating system is

# still running correctly.

#

# AOF and RDB persistence can be enabled at the same time without problems.

# If the AOF is enabled on startup Redis will load the AOF, that is the file

# with the better durability guarantees.

#

# Please check http://redis.io/topics/persistence for more information.


appendonly no


# The name of the append only file (default: "appendonly.aof")


appendfilename "appendonly.aof"


# The fsync() call tells the Operating System to actually write data on disk

# instead of waiting for more data in the output buffer. Some OS will really flush

# data on disk, some other OS will just try to do it ASAP.

#

# Redis supports three different modes:

#

# no: don't fsync, just let the OS flush the data when it wants. Faster.

# always: fsync after every write to the append only log. Slow, Safest.

# everysec: fsync only one time every second. Compromise.

#

# The default is "everysec", as that's usually the right compromise between

# speed and data safety. It's up to you to understand if you can relax this to

# "no" that will let the operating system flush the output buffer when

# it wants, for better performances (but if you can live with the idea of

# some data loss consider the default persistence mode that's snapshotting),

# or on the contrary, use "always" that's very slow but a bit safer than

# everysec.

#

# More details please check the following article:

# http://antirez.com/post/redis-persistence-demystified.html

#

# If unsure, use "everysec".


# appendfsync always

appendfsync everysec

# appendfsync no


# When the AOF fsync policy is set to always or everysec, and a background

# saving process (a background save or AOF log background rewriting) is

# performing a lot of I/O against the disk, in some Linux configurations

# Redis may block too long on the fsync() call. Note that there is no fix for

# this currently, as even performing fsync in a different thread will block

# our synchronous write(2) call.

#

# In order to mitigate this problem it's possible to use the following option

# that will prevent fsync() from being called in the main process while a

# BGSAVE or BGREWRITEAOF is in progress.

#

# This means that while another child is saving, the durability of Redis is

# the same as "appendfsync none". In practical terms, this means that it is

# possible to lose up to 30 seconds of log in the worst scenario (with the

# default Linux settings).

#

# If you have latency problems turn this to "yes". Otherwise leave it as

# "no" that is the safest pick from the point of view of durability.


no-appendfsync-on-rewrite no


# Automatic rewrite of the append only file.

# Redis is able to automatically rewrite the log file implicitly calling

# BGREWRITEAOF when the AOF log size grows by the specified percentage.

#

# This is how it works: Redis remembers the size

1条回答
  •  admin
    admin (楼主)
    2019-12-08 20:36

    应该是服务器配置资源不够或者版本的问题

    有人遇到了同样的问题:https://bbs.csdn.net/topics/392566194?list=lz

    bladex放在服务器上做演示,redis已经运行10个月也没有出现连接超时的问题

    0 讨论(0)
提交回复